DEED VMC50B CNC Vertical Machining Center
VMC50B travel：850*500*600mm，The vertical machining center VMC50B adopts a cross sliding table moving structure, and the guide rail adopts a linear rolling guide. It is mainly used for processing various small and medium-sized complex parts.
- Product Introduction
Product Information
The DEED VMC50B CNC vertical machining center can complete milling, drilling, expanding, boring, tapping and contour milling in a fixture. It is suitable for processing various parts with high precision, multiple processes and complex shapes. It is a very important key equipment in general machinery, mold, energy, transportation and other industries.
The high speed cutting of DEED VMC50B CNC vertical machining center has high feed speed and cutting speed, which can greatly shorten the cutting time of the workpiece. More than 90% of the cutting heat has been taken away by the chips flowing out at high speed before it is transferred to the workpiece. Therefore, the heat accumulated on the workpiece is very little, and the temperature rise of the workpiece is also very small. Therefore, the thermal deformation of the workpiece caused by the temperature rise is very small, which can be ignored. Therefore, it is very suitable for processing long and thin parts that are easy to be hot deformed and require high precision, as well as materials with low melting point and easy to be oxidized.
Specification
| Control System | FANUC/Siemens/Mitsubishi |
| TRAVEL |
|
| X-axis travel (mm) | 850 mm |
| Y-axis travel (mm) | 500 mm |
| Z-axis travel (mm) | 600 mm |
| Spindle nose to table surface (mm) | 150-750 mm |
| SPINDLE |
|
| Drive type | Direct drive |
| Spindle taper | BT40 |
| Max. Speed rpm | 12000 |
| Spindle Power (kW) | 11/18.5 kW |
| Spindle Torque (Nm) | 70/117 Nm |
| TABLE |
|
| Size (mm) | 950x500 mm |
| T-Slot (size * quantity * space) | 18x4x100 |
| Max load (kg) | 600 kg |
| FEED |
|
| X/Y/Z aixs accelerated speed | 5 m/s² |
| Rapid traverse (m/min) | 40/40/42 m/min |
| ACCURACY |
|
| Positioning(half-closed loop) (mm) | 0.006 mm |
| Repeatability(half-closed loop) (mm) | 0.004 mm |
| ATC |
|
| Type | Disc type /24T |
| Maximum tool size(full/unfull/length) | Φ78/Φ150/300 |
| Maximum tool weight (kg) | 8 kg |
| OTHERS |
|
| Air Pressure (MPa) | 0.65 MPa |
| Power Capacity (KVA) | 35 kVA |
| Machine Weight (kg) | 7500 kg |
| Machine Floor Space (L *W *H) (mm) | 3000X3200X3100 mm |
Hot Tags: deed vmc50b cnc vertical machining center, suppliers, manufacturers, factory