Recently, many clinents are consulting us about how to prolong the service life of horizontal milling machine and how to use horizontal milling machine correctly. For these problems, we will share the technics and experience of using horizontal milling machines and methods to prolong the service life of horizontal milling machine, so that you can use horizontal milling machine correctly and prolong the service life.

1. Installation environment of horizontal milling machine

   It is generally installed far away from the vibration source, not exposed to direct sunlight, no heat radiation and no humidity. If there is a vibration source near the place where the horizontal milling machine is installed, a shockproof ditch should be set around it. If the shockproof ditch is not set, it will directly affect the machining accuracy and stability of the horizontal milling machine. Over time, it will cause the poor contact, failure and affect the reliability of electronic components.

2. Strictly control the voltage and current of horizontal milling machine

   Horizontal milling machine are generally installed in the machining workshop, and there are many mechanical equipment in the machining workshop, which will inevitably lead to large power grid turbulence. When installing the horizontal milling machine, the voltage and current of the power supply must be strictly controlled, the voltage and current of the power supply must be controlled within the allowable range, and the voltage and current of the power supply must be kept stable, otherwise the normal operation of the milling machine will be directly affected.

3. Temperature and humidity of horizontal milling machine

   Generally, the horizontal milling machine can work normally only under the environment of less than 30 ℃. In general, the distribution box of the horizontal milling machine is equipped with exhaust fan and cooling fan to ensure that the electronic parts and central processing work under constant temperature. If the temperature and humidity are too high, the component life of the control system will be reduced and the failure of the horizontal milling machine will increase for no reason. If the humidity increases, dust will increase on the integrated circuit board, which will directly lead to poor contact and short circuit.

4. Factory parameter setting of horizontal milling machine

   When applying the milling machine, customers cannot change the factory parameter settings of the machine tool at will, because these factory parameter settings are directly related to the dynamic characteristics of various components of the horizontal milling machine, and only the gap compensation parameter values can be set according to the actual environment. If you want to change the factory setting parameters, contact the manufacturer and change the factory setting parameters under the guidance of the manufacturer's technicians.