Gantry Machining Center GL18 Series
DEED double column gantry machining center GL18 series adopts a closed gantry frame structure composed of bed, column and beam, which has the characteristics of high rigidity and high stability. The machine tool can complete milling, boring, drilling, rigid tapping and three-axis linkage surface processing, and can add right angle milling head according to customer requirements to realize five side processing at one time. It is especially suitable for rough / semi finish machining of die parts,processing of automation equipment structural parts and railway structural parts, processing of large parts in energy, engineering and casting industries,processing of railway steering knuckle and large structural parts, etc
- Product Introduction
Overview
The gantry machining center GL18 series is an economical and efficient whole process processing equipment. It is equipped with an excellent high stiffness structure, which can maintain the stability of the structure after long-term continuous processing. The machine tool and column of this equipment are made of new materials and technologies of UHPC from Germany, so it has excellent shock absorption, low thermal expansion coefficient, low thermal conductivity, corrosion resistance, room temperature casting, and low internal stress after solidification. It will not produce much vibration and noise, which is a good working environment for employees' creativity.
Features
1. The worktable, sliding block, spindle box and other moving parts of the gantry machining center GL18 series adopt Germany's advanced new steel plate welding technology, with high rigidity. At the same time, this technology reduces the weight of moving parts, reduces the motion inertia potential energy, and improves the response speed and motion accuracy of the machine tool.
2. The three coordinate moving parts are supported by the heavy load roller linear guide rail, and the roller retainer ring is used to prevent deviation, which can achieve balanced and stable movement and ensure the accuracy and stability of the machine tool in long-term operation.
3. The spindle box adopts a large section slider structure, supported by a heavy load roller linear guide rail, which has strong resistance to the spindle crosscutting, and can realize strong cutting of Z-axis full stroke.
4. Z-axis adopts double balancing cylinders to eliminate the unbalanced torque caused by dead weight.
| TRAVEL | G2018L | G2518L | G3018L | G3518L | G4018L | G4518L | G5018L | G5518L | G6018L |
| Distance between columns | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm |
| X-axis travel | 2100mm | 2600mm | 3100mm | 3600mm | 4000mm | 4500mm | 5000mm | 5500mm | 6000mm |
| Y-axis travel | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm | 1800mm |
| Z-axis travel | 850mm | 850mm | 850mm | 850mm | 850mm | 850mm | 850mm | 850mm | 850mm |
| Spindle nose to table surface | 200-1050mm | 200-1050mm | 200-1050mm | 200-1050mm | 200-1050mm | 200-1050mm | 200-1050mm | 200-1050mm | 200-1050mm |
| SPINDLE |
|
|
|
|
|
|
|
|
|
| Drive type | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 | Belt drive 1:1.33 |
| Spindle taper | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 |
| Max. Speed | 6000 rpm | 6000 rpm | 6000 rpm | 6000 rpm | 6000 rpm | 6000 rpm | 6000 rpm | 6000 rpm | 6000 rpm |
| Spindle Power | 15/18.5 KW | 15/18.5 KW | 15/18.5 KW | 15/18.5 KW | 15/18.5 KW | 18/35 KW | 18/35 KW | 18/35 KW | 18/35 KW |
| Spindle Torque | 190/313 Nm | 190/313 Nm | 190/313 Nm | 190/313 Nm | 190/313 Nm | 156.9/296 Nm | 156.9/296 Nm | 156.9/296 Nm | 156.9/296 Nm |
| Spindle box section | 350*400mm | 350*400mm | 350*400mm | 350*400mm | 350*400mm | 350*400mm | 350*400mm | 350*400mm | 350*400mm |
| WORKTABLE |
|
|
|
|
|
|
|
|
|
| Worktable width | 1600mm | 1600mm | 1600mm | 1600mm | 1600mm | 1600mm | 1600mm | 1600mm | 1600mm |
| T-Slot size | 22mm | 22mm | 22mm | 22mm | 22mm | 22mm | 22mm | 22mm | 22mm |
| Max load | 6000kgs | 7000kgs | 8000kgs | 9000kgs | 10000kgs | 11000kgs | 12000kgs | 13000kgs | 14000kgs |
| FEED |
|
|
|
|
|
|
|
|
|
| Max.cutting speed | 10m/min | 10m/min | 10m/min | 10m/min | 8m/min | 8m/min | 8m/min | 8m/min | 8m/min |
| Rapid traverse | 16/16/16 m/min | 16/16/16 m/min | 16/16/16 m/min | 12/16/16 m/min | 8/16/16 m/min | 8/16/16 m/min | 8/16/16 m/min | 8/16/16 m/min | 8/16/16 m/min |
| ACCURACY |
|
|
|
|
|
|
|
|
|
| Positioning(half-closed loop) | 0.018/0.018/0.017mm | 0.019/0.018/0.017mm | 0.02/0.018/0.017mm | 0.021/0.018/0.017mm | 0.022/0.018/0.017mm | 0.025/0.018/0.017mm | 0.027/0.018/0.017mm | 0.028/0.018/0.017mm | 0.03/0.018/0.017mm |
| Repeatability(half-closed loop) | 0.013/0.012/0.008mm | 0.014/0.012/0.008mm | 0.015/0.012/0.008mm | 0.016/0.012/0.008mm | 0.017/0.012/0.008mm | 0.018/0.012/0.008mm | 0.019/0.012/0.008mm | 0.02/0.012/0.008mm | 0.021/0.012/0.008mm |
| OTHERS |
|
|
|
|
|
|
|
|
|
| Air Pressure | 0.65Mpa | 0.65Mpa | 0.65Mpa | 0.65Mpa | 0.65Mpa | 0.65Mpa | 0.65Mpa | 0.65Mpa | 0.65Mpa |
| Power Capacity | 30kVA | 30kVA | 30kVA | 30kVA | 30kVA | 45kVA | 45kVA | 45kVA | 45kVA |
| Machine Weight | 18500kgs | 20500kgs | 22500kgs | 24500kgs | 26500kgs | 26500kgs | 30500kgs | 32500kgs | 32500kgs |
| Machine Floor Space (L *W *H) | 6885*5000*4800mm | 7885*5000*4800mm | 8885*5000*4800mm | 9885*5000*4800mm | 10885*5000*4800mm | 11885*5000*4800mm | 12885*5000*4800mm | 13885*5000*4800mm | 14885*5000*4800mm |
Hot Tags: gantry machining center gl18 series, suppliers, manufacturers, factory