Requirements On Installation Environment Of Longmen Vertical Machining Center

Gantry vertical machining center:

1. Voltage and current control

There are a lot of processing equipment in the workshop, which will cause the power grid to fluctuate too much. We need to control the voltage and current within the allowable range of the gantry vertical machining center and maintain stability, otherwise it may affect the work of the system. The power supply should be: 380V ± 10%, three-phase alternating current.

2. Temperature and humidity

The best processing environment temperature of gantry vertical machining center is below 30 ° C. Excessive ambient temperature and humidity will reduce the life of the control system components of the gantry vertical machining center. Excessive ambient humidity can also cause short circuits and failures on the integrated circuit board of the gantry vertical machining center.

3. Location requirements

Gantry vertical machining center is away from direct sources of vibration and sunlight. If there is active nearby, anti-shock device should be installed.

A good installation environment can prevent the gantry vertical machining center from avoiding some faults during the machining process, and the machining accuracy is safer.

At present, Gantry vertical machining center has become faster and faster with its high efficiency and high precision, and it has become the most popular category of CNC machine tools with the fastest growth rate. Gantry vertical machining center is also the most widely used in manufacturing. Gantry vertical machining center has become the mainstream of consumption. Some major economically developed countries regard the development of gantry vertical machining centers as the primary task of the development of CNC machine tools. Its development is directly related to national economic construction and national defense security.